MERIT INDUSTRIES Ion Rx Service Manual download pdf (Page 206)

FLDBLL68 – PM0726-01

Field Bulletin PAGE 2 OF 2

To Update Via Disc

Connecting a DVD Drive

1. Turn off the game.

2. Connect the 2 x 20-pin IDE connector to the IDE interface connector on the DVD drive. Make sure

the red stripe on the ribbon cable matches up with pin 1 on the IDE interface connector.

3. Connect the four 4-pin power connector on the ribbon cable to the DC power input on the DVD drive.

4. Connect the centronics connector on the ribbon cable to the centronics connector on the game. (If

you need further instructions in doing this, please refer to your Owner’s Manual.) NOTE: When

positioning your DVD drive, it is important that you find a suitable place where the DVD drive

will not be in danger of coming in contact with any components or wires inside of the game.

Program Installation

Performing this upgrade will delete previous information and files on your hard drive. If you want

to retain any pertinent information (ex: Books Screen information), you will need to document that

information before performing the upgrade.

The update process could take from 10 to 15 minutes, depending on the speed of your DVD drive.

5. If you are connected to TournaMAXX or TournaCHAMP, you must perform an Update From Server

before beginning this installation so that no information is deleted.

6. For Force Games

: Insert the Force Disc into the drive. If you don't get the disc into the drive before

the game starts to boot-up, turn off the game and turn it back on.

For Ion Games

: Insert Ion Disc 1 into the drive. If you don’t get the disc into the drive before the game

starts to boot-up, turn off the game and turn it back on.

7. The message “By continuing with this installation program, you indicate that you accept the

terms of Merit’s software license agreement” will appear on the screen. If you accept the terms,

select Yes, I agree.

8. For Force Games

: Skip to step 9.

For Ion Games

: When the first disc is finished installing, the message: "Please replace the current

disc with disc #2 then close the door to continue" will appear on the screen. Remove the first

disc, insert the disc labeled Disc 2 and close the door.

9. When the installation is complete, the screen will display the message “Installation Complete!

Please remove the disc and Reboot.”

10. Remove the disc and turn off power to the game.

11. Carefully disconnect the ribbon cable from the centronics connector on the game. Be sure to grasp

the connector and not the cable itself.

12. Turn on the game. When the game boots up, you will be prompted to calibrate the game. Follow the

instructions on the screen.

13. If you are connected to TournaMAXX or TournaCHAMP, you must perform an Update From Server.

You will have to re-enter the dial-in settings first. Refer to the MegaNet manual for instructions.

If you have any questions, please contact Merit Customer Service and Technical Support by phone at

215-826-1400 or 1-800-523-2760, or by e-mail: [email protected]

1 2 ... 201 202 203 204 205 206 207 208

Comments to this Manuals

No comments

MERIT INDUSTRIES Ion Rx Service Manual Page 206

Comments to this Manuals

Related products and manuals for Video games & consoles MERIT INDUSTRIES Ion Rx