MERIT INDUSTRIES Ion Rx Service Manual Page 104

  • Download
  • Add to my manuals
  • Print
  • Page
    / 208
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 103
COPYRIGHT © 2009 MERIT INDUSTRIES, INC.
Power Supply Installation
1. Feed the 4-pin and 20-pin connector harnesses running from the new power supply through the
window on the power supply mounting bracket. Snap the power supply mounting bracket onto the
new power supply. See Figure 4.
2. Place the power supply/mounting bracket assembly in the electronics box. See Figure 3. Slide the
bracket assembly to the left so that the tab on the bracket fits into the slot on the electronics box.
Secure the bracket to the electronics box with the 2 hex nuts. See Figure 3.
3. Reconnect the power cord to the power supply. Connect the 4-pin and 20-pin connector har-
nesses from the power supply to their mating connectors.
4. Secure the meter to the electronics box with 2 screws. See Figure 2.
5. Secure the Centronics connector to the electronics box with 2 screws. See Figure 2.
6. Secure the USB port to the electronics box with 2 screws. See Figure 2.
7. Reconnect the hard drive cable to the motherboard at IDE1. See Figure 2.
8. Reconnect all connections to the I/O board. Replace the I/O board inside the electronics box and
secure with 4 screws. See Figure 2.
9. Replace the electronics box cover, making sure that the hard drive cable (with the writing facing
out on applicable systems) and 2 OSD connectors feed through the window on the cover. Secure
the cover with 2 screws. See Figure 1.
10. Reconnect the hard drive cable to the hard drive. Tighten the screw securing the hard drive sup-
port bracket (where used). Restore the 2 OSD connections, and reconnect the 3 fans on the face
of the electronics box. See Figure 1.
11. Close and lock the bezel.
12. Plug in and turn on the game.
ATTENTION:
OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES
Removal/Installation of Major Assemblies -
Ion Fusion (cont’d)
Troubleshooting Information - Removal/Installation of Major Assemblies -
Ion Fusion
Megatouch Ion Technical Reference Manual
Page view 103
1 2 ... 99 100 101 102 103 104 105 106 107 108 109 ... 207 208

Comments to this Manuals

No comments