MERIT INDUSTRIES Ion Rx Service Manual download pdf (Page 112)

HARD DRIVE

DATA CABLE

HARD DRIVE

POWER CABLE

Hard Drive Removal

Hard Drive Identification:

To determine whether your hard drive is quick-click or non-quick-click, look for a light gray adapter

between the hard drive adapter and the hard drive mounting bracket. See Figure 1. If there is such an

adapter, then you have a quick-click hard drive; if not, then your hard drive is non-quick-click. The PATA

hard drive with a clamp will simply have a clamp as shown in Figure 1. The SATA hard drive is also

shown in Figure 1. The SATA is easily identifable by the lack of a hard drive ribbon cable and adapter.

HARD

DRIVE

HARD DRIVE

ADAPTER

QUICK-CLICK

ADAPTER

FIGURE 1 - HARD DRIVES

Quick-Click Hard Drive Removal

1. If you are connected to TournaMAXX or TournaCHAMP you must perform an Update From Server

before removing the hard drive so that no information is deleted.

2. Turn off and unplug the game.

3. Unlock the rear door and open if it is hinged, or remove if it is detachable.

4. Disconnect the hard drive adapter, with the attached ribbon cable, from the hard drive. See Figure

2. Remove the screw (through the quick-click adapter) securing the hard drive to the mounting

plate. Remove the hard drive and the attached bracket from the mounting plate by sliding the

assembly up and off the plate.

(a) Quick-click

HARD DRIVE

ADAPTER

HARD DRIVE

ADAPTER CLAMP

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES

Removal/Installation of Major Assemblies -

Ion Aurora

Troubleshooting Information - Removal/Installation of Major Assemblies -

Ion Aurora

Megatouch Ion Technical Reference Manual

1 2 ... 107 108 109 110 111 112 113 114 115 116 117 ... 207 208

No comments

MERIT INDUSTRIES Ion Rx Service Manual Page 112