MERIT INDUSTRIES Ion Rx Service Manual download pdf (Page 134)

ATTENTION:

OBSERVE PRECAUTIONS FOR HANDLING ESD-SENSITIVE DEVICES

Removal/Installation of Major Assemblies -

Ion Aurora Widescreen

Troubleshooting Information - Removal/Installation of Major Assemblies -

Ion Aurora Widescreen

Megatouch Ion Technical Reference Manual

Credit Card Reader Removal

1. Turn off and unplug the game.

2. Unlock the rear door and open it.

3. Reach under the center of the top of the cover to locate the rotary draw latch (see Figure 1). Turn

the wing on the latch counterclockwise to disengage.

FIGURE 1 - ROTARY DRAW LATCH INSIDE TOP COVER

FIGURE 2 - SCREW IN CENTER OF BOTTOM COVER

4. Unscrew the screw located in the center of the bottom of the cover (see Figure 2). Slowly lift the

cover and disconnect the ground wire.

5. Place something in front of the game to brace the bezel once the strain relief cord is undone, then

remove the screw at the center of the marquee bezel and the 2 screws on the back of the bezel.

Remove the nut and washer securing the security bolt inside the CPU section (see Figure 3).

FIGURE 3 - SCREWS ON FRONT AND BACK OF BEZEL

SCREW

THROUGH

MARQUEE

SCREWS O

BACK OF BEZE

(2 PLACES

)

SECURITY BOLT,

WASHER AND NU

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 207 208

No comments

MERIT INDUSTRIES Ion Rx Service Manual Page 134