MERIT INDUSTRIES Ion Rx Service Manual download pdf (Page 166)

Circuit Boards - I/O Board Diagrams

Megatouch Ion Technical Reference Manual

I/O Board Diagrams

FIGURE 4 - I/O BOARD DRAWING

Required Connections

-I/O Board Power Connector: To supply power to the I/O board.

-Electronic Mech Connector: For electronic coin mech operation.

-Smiley Bill Acceptor Connector: For Smiley bill acceptor operation (international games).

-Mars Bill Acceptor Connector: For Mars bill acceptor operation (domestic games).

-Mechanical Mech/Lockout Connector: For mechanical coin mech operation.

-Meter Connector: For meter operation, connected at the factory (meter 1 = coin drop, meter 2 = TournaMAXX).

-Joystick Connector: For joystick operation.

-Motherboard: Connects I/O board and motherboard, connected at the factory.

-Remote calibrate/setup/key connector: OSD board operation, connected at the factory.

-Jumper at JP1: For coin mech functionality. For the following games with an Imonex V92 series coin mech AND a

serial number greater than the listed number, the shunt must be removed from JP1:

(The first 6 digits of the serial number are the date of manufacture.)

-Aurora games with a serial number of 043007XXXXXXXX or greater

-Ion eVo games with a serial number of 100107XXXXXXXX or greater

-Ion Elite Edge games a serial number of 092507XXXXXXXX or greater

-Ion eVo Wallette & Megatouch Entertainer games with a serial number of 100107XXXXXXXX or greater

The shunt is in place for all other Aurora, Ion eVo, Ion Elite Edge Ion eVo Wallette & Megatouch Entertainer games.

-Jumper at JP7: For coin mech functionality (removed for games with Imonex coin mechs; in place for all other

games). I/O boards SA10068-05, -06, -08 and -09 only.

-Jumper at JP8: For coin mech functionality (removed for games with Imonex coin mechs; in place for all other

games). I/O boards SA10068-01, -02, -03 and -04 only.

-Jumpers at JP12 and JP13: For mini-Drucker printer function (German games only), the shunts must be on pins 2

and 3 for both. For Money Shoot games, the shunts must be on pins 1 and 2 for both.

-Jumper at JP14: For speaker function (Megatouch Entertainer only). If using the speakers that came with the unit or

using your own speakers, the shunt must be on pins 1 and 2. If using the Premium Sound System Kit, or using your

own amplifier, the shunt must be on pins 2 and 3.

-Jumper at JP17: For joystick functionality (removed for eVo Wallette, Megatouch Entertainer and Champ games; in

place for Aurora, eVo, Elite Edge, and Fusion games).

PIN 1

AT JUMPER

JP14 FOR SPEAKER FUNCTION

(MEGATOUCH ENTERTAINER ONLY)

CALIBRATE

SETUP

J12

SPEAKER

JUMPER AT JP13 FOR

PRINTER FUNCTION

POWER CONNECTOR

JUMPER AT JP12

FOR PRINTER

FUNCTION

JUMPER AT JP7 FOR

COIN MECH FUNCTION

MARS BILL ACCEPTOR

SMILEY BILL ACCEPTOR

ELECTRONIC COIN MECH

MECHANICAL COIN MECH

METER 1 (COIN DROP)

J19

METER 2 (TOURNAMAXX)

J11

REMOTE CALIBRATE/SETUP/KEY

ON OSD BOARD

DIP SWITCH

BANK

CONNECTS TO

USB2 ON

MOTHERBOARD

J29

JOYSTICK

JUMPER AT JP17

FOR JOYSTICK

FUNCTION

JUMPER AT JP1 FOR

COIN MECH FUNCTION

JUMPER AT JP8 FOR

COIN MECH FUNCTION

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 207 208

Comments to this Manuals

No comments

MERIT INDUSTRIES Ion Rx Service Manual Page 166

Comments to this Manuals

Related products and manuals for Video games & consoles MERIT INDUSTRIES Ion Rx