MERIT INDUSTRIES Ion Rx Owner's Manual download pdf (Page 4)

MEGATOUCH ION RX OWNER’S MANUAL PM0721-01

Site Preparation

In determining the location for your Mega-

touch Ion video game, consideration must

be given to a suitable, grounded electrical

outlet. Since the game is a computerized

device, it should have a separate circuit, if

at all possible. If a separate circuit is not

available, care should be taken to provide a

clean and constant voltage. As a basic

guideline, never connect the unit to a circuit

that also supplies power to freezers, cool-

ers or other high power consuming and elec-

trical noise generating equipment. Place the

game in a location where nothing will inter-

fere with proper ventilation. The game should

not be exposed to any dripping or splashing

liquids. Objects filled with liquid should not

be placed on the unit.

Setting up your Megatouch Game

1. After removing the game from the car-

ton, attach the power cord to the back

of the game near the ON/OFF switch.

Plug the game into a standard AC out-

let.

2. Turn the power switch at the back of

the game to ON and wait for it to go

through its boot-up sequence. The

game will display the Main Menu Screen.

3. If you have a unit on the Broadband

Subscription Model, follow the steps in

Broadband Connection Instruc-

tions to connect to the server in order

to activate it.

4. The machine has been preset at the

factory and therefore should not need

to be adjusted, however it is recom-

mended that the screen be calibrated

(see Screen Calibration) and the coin

or bill acceptor(s) be tested.

5. There are many custom settings avail-

able for the game. To customize the

settings, follow the software instruc-

tions in this manual.

Game Description

The Rx model has one lock located on the

back of the unit. To open the unit, unlock this

lock and lift the front bezel from the rear of

the system. It comes equipped with a coin

mech and/or bill acceptor. This model also

has couplers installed in the rear of the game.

These are used for future hardware up-

grades which include linking and modem ca-

pabilities. Each game comes equipped with

a wireless USB adapter that can be used to

wirelessly link two Ion games together by

simply turning the games on. With the addi-

tion of a wireless router, the game(s) can

also connect to the Internet. The Linksys

802.11G router is recommended. For more

information, see Wireless Setup.

All of the major components of the Rx sys-

tem are located inside the cabinet, which

can be opened by unlocking a single lock.

These components include the motherboard,

LCD monitor, I/O board, power supply, hard

drive, coin box, and bill acceptor. On the I/O

board (located under the flap on the right

IMPORTANT NOTICE

While the Megatouch Rx is weather-resistant, and designed to channel water away from

internal electronic components, it is not weather-proof. It is recommended that the Rx be

placed in a protected environment out of direct rain and sunlight, such as under a canopy

or awning. If the game does get wet, please turn it off and allow it to dry completely before

continuing play.

When placed outdoors this unit should be properly grounded by using a GFCI (ground fault

circuit interrupter) outlet. Additionally, all extension cords used should be heavy-duty and

rated for outdoor use.

1 2 3 4 5 6 7 8 9 ... 55 56

Comments to this Manuals

No comments

MERIT INDUSTRIES Ion Rx Owner's Manual Page 4

Comments to this Manuals

Related products and manuals for Video games & consoles MERIT INDUSTRIES Ion Rx